Oil and Air Seperating Hydropneumatic Cylinder (JLFA)

JLFA oil and air seperating cylinder

Characters of pneumatic and hydraulic cylinder

1. Faster than hydraulic cylinder and more stable than pneumatic cylinder.

2. Easy to set up, adjust and maintain.

3. Can achieve the same high pressure output as those from hydraulic cylinder.

4. Power source is easy to obtain and more economic.

5. Operation with little noise.

6. Without high-temp problem caused by hydraulic cylinder.

This kind of cylinder can be used on sheet metal joining, punching/piercing, coining/marking/stamping, Pressing/ compressing/straightening, riveting/crimping/flaring, assembling/press-fitting/mounting, Bending/edging, clamping/ tensioning/peening, and so on.

This cylinder can be only installed upright and for this item, the operating speed is very fast.

Product detailed models information:

JLFA -100-100--10E-10T

First 100 stands for the cylinder diameter, can be 80mm, 160MM, 180mm and 200MM.

Second 100 stands for the total stroke, can be: 50 MM and 150 MM, 200MM, 250MM.

10E stands for the power stroke, can be: 5MM, 10 MM, 20MM

10T stands for the outlet force, can be: 20 tons, 30tons, 40 tons and 60 tons...

For this type of hydro pneumatic cylinder, usually the air driven pressure should be not more Than: 8 Bar, it is best to set up the compressed air pressure to be: 6 Bar.